Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Blink LED Using a Breadboard

Piano
Linkbot Image Mindstorm Image Cursor Image
0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (6 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (18 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in
Blink LED Using a Breadboard
/* Code generated by RoboBlockly v2.1 */
/* Problem Statement: 
    Run the code blocks provided to turn on the red LED for one
    second and then turn it off, for three times total. Once it
    is working, change the code so that it blinks 4 times
    total, for 2 seconds the first blink, then 1 second each
    for the second and third blinks, and finally 3 seconds for
    the fourth blink, with 1 second between each blink.
    */
#include <arduino.h>

pinMode(3, OUTPUT);
digitalWrite(3, HIGH);
delay(2000);
digitalWrite(3, LOW);
delay(1000);
digitalWrite(3, HIGH);
delay(1000);
digitalWrite(3, LOW);
delay(1000);
digitalWrite(3, HIGH);
delay(1000);
digitalWrite(3, LOW);
delay(1000);
digitalWrite(3, HIGH);
delay(3000);
digitalWrite(3, LOW);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:

Run the code blocks provided to turn on the red LED for one second and then turn it off, for three times total. Once it is working, change the code so that it blinks 4 times total, for 2 seconds the first blink, then 1 second each for the second and third blinks, and finally 3 seconds for the fourth blink, with 1 second between each blink.


		
Rubbish bin
Time